Description
The MPRC086444-005 (also referenced as 086444-005) is a direct fiber optic interface module from ABB’s MPRC (Multi-Processor/Measurement Processing) series. This specialized Printed Wiring Assembly (PWA) is engineered to provide high-speed, noise-immune digital communication links in ABB distributed control systems, particularly within the Advant Controller 410/450 and Symphony DCS platforms -2-7-8.
Unlike conventional copper-based I/O modules, the MPRC086444-005 converts electrical signals to optical signals for transmission over fiber optic cables, enabling long-distance data transfer while offering complete immunity to electromagnetic interference (EMI) -2. The module primarily functions as a 16-channel isolated digital input interface, collecting field switch, sensor, and status signals and transmitting them to the system controller via direct fiber optic links -7.
Application Scenarios
In a large petrochemical complex spanning over one kilometer, control cabinets are distributed across multiple process units. Traditional copper wiring would be susceptible to interference from high-power motors and variable-frequency drives, and signal degradation over distance would be a constant concern. The MPRC086444-005 modules installed in each remote cabinet convert field digital signals from pumps, valves, and safety interlocks into optical signals, transmitting them to the central Advant Controller without loss or corruption. When a module’s fiber link LED indicated a communication fault on a critical reactor interlock circuit, maintenance technicians could quickly pinpoint the issue and replace the hot-swappable MPRC086444-005 without shutting down the entire system, maintaining continuous operation -7.
For system integrators upgrading legacy DCS installations or expanding remote I/O capabilities, the MPRC086444-005 addresses critical pain points: eliminating ground loops, enabling communication distances up to 2km, and providing galvanic isolation that protects sensitive control electronics from field-side surges -2-7. The module’s compatibility with the CI522A communication interface and integration with Advant and Symphony architectures make it an essential component for sustaining and extending the life of these established control platforms -7-8.
Parameters
| Main Parameters | Value/Description |
|---|---|
| Product Model | MPRC086444-005 (also 086444-005) |
| Manufacturer | ABB (Symphony/Advant/MPRC Series) |
| Product Category | Direct Fiber Optic Digital Input Module / PWA |
| Digital Inputs | 16 channels (isolated, 24V DC) -7 |
| Input Voltage Range | 24V DC ±20% (ON: ≥18V, OFF: ≤5V) -7 |
| Channel Isolation | 2.5kV photoelectric isolation (channel-to-channel and channel-to-ground) -7 |
| Fiber Optic Data Rate | Up to 1 Gbps (100 Mbps typical) -3-7 |
| Fiber Compatibility | Single-mode and multimode; supports LC/SC interface types -3-10 |
| Transmission Distance | Up to 2km (depending on fiber type and system configuration) -7 |
| Response Time | ≤1ms (with programmable 0.1ms–100ms input filtering) -7 |
| Operating Temperature | -20°C to +60°C (some sources: -40°C to +85°C) -1-7 |
| Enclosure Rating | IP20 (rack/cabinet-mounted) -3 |
| System Compatibility | ABB Advant Controller 410/450, Symphony, INFI 90 DCS -7-8 |
| Mounting | Backplane/rack slot or DIN rail -7 |
| Hot Swappable | Supported (with proper system configuration) -7 |
WhatsApp:+86 18150087953 WeChat: +86 18150087953
Email:






