Technical Specifications
| Parameter Name | Parameter Value |
|---|---|
| Product Model | YCB147-2 |
| Manufacturer | Yokogawa Electric Corporation (Japan) |
| Product Type | Control Bus Cable Conversion Adapter (Passive) |
| Compatible Systems | CENTUM CS 1000 / CS 3000 / CENTUM VP; ProSafe-RS |
| Supported Bus Types | V net (10BASE-2 / 10BASE-5), ESB bus, ER bus |
| Connector Quantity | 2 (-2 suffix denotes two connectors) |
| Connector Types | BNC (10BASE-2 side) / N-type (10BASE-5 side) |
| Impedance Matching | 50 Ω with built-in termination resistance |
| Power Requirement | None (passive operation) |
| Operating Temperature | 0°C to +55°C (typical cabinet environment) |
| Mounting Option | Panel-mount or 19-inch rack-mount (/BR option) |
| Weight (bare unit) | Approx. 100 g |
Main Features and Advantages
Passive reliability eliminates failure modes: The Yokogawa YCB147-2 operates without any external power supply, which removes an entire category of potential failure from the reliability equation. There is no power supply to drift, no firmware to corrupt, and no configuration to lose during a power event. This passive design philosophy aligns directly with the availability expectations of DCS and SIS environments, where every additional active component represents a calculable decrease in mean time between failures. The YCB147-2 simply performs its impedance-matching function as long as the physical connection remains intact.
Precise termination for signal integrity: V net bus segments that mix cable types without proper termination are vulnerable to signal reflections, which manifest as intermittent communication timeouts and phantom bus errors. The Yokogawa YCB147-2 incorporates a 50-ohm termination resistance matched to the V net cable impedance, absorbing reflections at the conversion point and preserving the integrity of the Manchester-encoded 10 Mbps signal . This is particularly relevant in retrofit scenarios where a 10BASE-2 segment from a safety control unit must interface with an existing 10BASE-5 backbone; the YCB147-2 provides the electrical transition that makes such mixed-media topologies viable.
Compact rack-mount form factor: The adapter’s small footprint and optional /BR rack-mount configuration allow it to be installed within standard Yokogawa cabinets without consuming significant panel space. In high-density control room environments, the Yokogawa YCB147-2 can be positioned near the cable entry point to minimize the length of the more flexible 10BASE-2 segment, a practice recommended in Yokogawa’s installation guidance . This layout consideration reduces mechanical stress on the thinner coaxial cable and simplifies maintenance access.
Application Field
The primary application domain for the Yokogawa YCB147-2 is the physical-layer integration of V net control bus segments within legacy CENTUM and ProSafe-RS architectures. In plants where a safety instrumented system communicates with the DCS, the ProSafe-RS safety control unit typically connects via a 10BASE-2 V net cable, while the CENTUM system may employ a 10BASE-5 backbone . The YCB147-2 provides the necessary BNC-to-N-type conversion at this junction, enabling the two systems to share a common bus segment without replacing the existing cabling infrastructure. This capability is especially valued in brownfield expansions where the cost and disruption of re-cabling an entire bus run would be prohibitive.
Beyond safety-to-DCS interconnections, the YCB147-2 supports system expansion projects that add remote I/O cabinets or extend existing V net segments. When a new ER bus node or ESB segment must be connected to a controller whose bus interface utilizes a different coaxial cable standard, the adapter resolves the physical mismatch without requiring a controller replacement or a firmware-level reconfiguration. For plants maintaining long-lived CS 3000 systems, the Yokogawa YCB147-2 represents a targeted spare part that addresses a specific, predictable failure point—the conversion interface—rather than a broad platform upgrade.
Related Products
YCB147-4: The four-connector variant of the YCB147-2, offering additional connection points for bus segments requiring more than two termination or conversion interfaces within the same rack.
YCB147-5: A related control bus adapter model with a different connector configuration, suited to alternative V net cable routing requirements.
YCB147-F: The explosion-proof version of the YCB147 series, designed for installation in hazardous area cabinets where the standard YCB147-2 is not rated for the environment.
YCB147-2/BR: The rack-mount option code for the YCB147-2, providing 19-inch rack installation hardware for standardized cabinet mounting.
AFG10S: The standard field control unit whose V net interface the YCB147-2 may serve when mixed cable types are present in the bus topology.
AFG10D: The dual-redundant FCS controller, where a pair of YCB147-2 adapters would typically be deployed to support Bus A and Bus B redundancy.
WhatsApp:+86 18005022363 WeChat: +86 18005022363
Email:





