Technical Specifications
| Parameter Name | Parameter Value |
|---|---|
| Product Model | KS1-02 |
| Manufacturer | Yokogawa Electric Corporation |
| Product Type | Signal Cable (40-40 pins) |
| Cable Length | 2 m |
| Connector Type | 40-pin male-to-male (both ends) |
| Signal Type | Analog and digital I/O signals |
| Compatible Systems | CENTUM VP, CENTUM CS 3000, CS 1000, ProSafe-RS |
| Compatible Terminal Boards | AEA3D, AEA4D, AET4D, A1BA4D, A1BT4D |
| Compatible Terminal Block | TKA4A (system panel side) |
| Compatible I/O Modules | AAI141, AAI143, AAI543, AAB844, SAI143, SAI533, SAV144 |
| Conductor Material | Multi-strand copper wire |
| Shielding | Braided copper shield |
| Insulation Material | Industrial-grade PVC / flame-retardant |
| Style Code | *B (Style B) |
| Option Code | /NL – CSA Non-Incendive instrumentation |
| Length Tolerance | +5%, -0% (for ≤ 3 m reference length) |
| Minimum Bending Radius | 100 mm |
| Operating Temperature | –20 °C to +70 °C |
| Storage Temperature | –20 °C to +70 °C |
| Installation Environment | Indoor control cabinet (IP20) |
| Cable Type | Twisted pair, shielded |
| Conductor Size | 0.5 mm² (approx.) |
| Certifications | CE, RoHS (batch dependent) |
| Origin | Japan (some batches Singapore / Malaysia) |
| Condition | New surplus / refurbished available |
Main Features and Advantages
Engineered for signal integrity: The Yokogawa KS1-02 is purpose-built to transmit low-level analog signals without degradation. Its shielded twisted-pair construction actively suppresses electromagnetic interference (EMI) and crosstalk—two of the most common causes of signal drift, false alarms, and inaccurate process readings in busy control cabinets. For analog input cards handling 4-20 mA signals from pressure, temperature, and flow transmitters, this level of noise immunity is not optional; it is essential to maintaining measurement accuracy and control loop stability.Standardized length eliminates field wiring errors: At exactly 2 meters, the Yokogawa KS1-02 provides a known, repeatable cable run between I/O modules and terminal boards. This removes the need for on-site cable cutting, crimping, or custom harness fabrication—steps that introduce both delay and risk. Engineers can pre-plan cable routing with confidence, and maintenance teams can swap modules quickly during troubleshooting or upgrades.Precision 40-pin connectors for secure mating: Both ends of the Yokogawa KS1-02 terminate in robust 40-pin connectors designed to seat positively with Yokogawa’s I/O module headers and terminal board receptacles. The connectors are keyed to prevent misinsertion, protecting both the cable and the expensive I/O modules it serves. The shield is continuous from end to end, ensuring a consistent ground reference and maximizing noise rejection across the full cable length.Flexible ordering and hazardous-area readiness: Beyond the standard Yokogawa KS1-02, the KS1 family supports a wide range of lengths (1 m to 50 m) and optional codes. The /NL option provides CSA Non-Incendive compliance for use with intrinsically safe instrumentation loops. ProSafe-RS-specific variants—/SAI143, /SAI533, and /SAV144—incorporate false-insertion prevention pins, ensuring that safety I/O modules cannot be accidentally connected to an incompatible cable. This level of configurability makes the Yokogawa KS1-02 platform adaptable to virtually any DCS wiring scenario.Rugged construction for industrial service: Rated for continuous operation from –20 °C to +70 °C, the Yokogawa KS1-02 is built to survive the thermal cycling, vibration, and electrical noise typical of process industry environments. Its flame-retardant insulation and durable outer jacket provide additional protection in high-density cabinet installations.
WhatsApp:+86 18005022363 WeChat: +86 18005022363
Email:





