Yokogawa ANB11D-225 – Dual Power, Dual Bus Redundancy for Continuous Process Control

The Yokogawa ANB11D-225 is an optical ESB (Enhanced Serial Bus) bus node unit from Yokogawa’s ANB11 series, designed for CENTUM VP and CENTUM CS 3000 distributed control systems. It functions as a remote I/O aggregation and fiber-optic repeater node, housing up to eight FIO or N-IO modules while converting electrical ESB signals to optical signals for transmission to the Field Control Unit. The Yokogawa ANB11D-225 is the dual-redundant configuration within the ANB11 family, featuring redundant power supplies and redundant optical bus paths for applications where I/O continuity is non-negotiable.

Category:
Contact Us WhatsApp / Wechat:+8618150087953
Phone:+86 18150087953
Email:sales@cxplcmro.com

Description

 

Application Scenarios

Consider a petrochemical complex where the central control room is positioned several hundred meters from the process unit’s I/O cabinets. The standard copper ESB bus is limited to roughly ten meters, making direct connection impossible. Extending copper cabling across that distance introduces ground potential differences and exposes the signal path to electromagnetic interference from large motors and variable frequency drives. The Yokogawa ANB11D-225 addresses this by converting the ESB bus to a fiber-optic link, extending reach to 5 km with the standard optical repeater pairing. In one representative offshore platform application, the Yokogawa ANB11D-225 was installed in a Remote Instrument Enclosure on the wellhead deck, collecting analog and contact inputs from wellhead control panels and transmitting them via fiber to the central control room. The fiber medium eliminated the common-mode voltage issues that had previously caused intermittent I/O faults during electrical storms, and the dual-redundant bus architecture ensured that a single fiber strand failure would not interrupt wellhead monitoring.

 

Parameter

Main Parameters Value / Description
Product Model Yokogawa ANB11D-225 (base)
Manufacturer Yokogawa Electric Corporation
Product Category Optical ESB Bus Node Unit (Remote I/O Node with Optical Repeater)
Compatible Systems CENTUM VP / CENTUM CS 3000
Compatible FCU AFV30□ / AFV40□ (requires EC401 or EC402 Bus Couple Module)
I/O Slots 8 slots (2 reserved for ESB interface modules)
Optical Repeater Range 5 km (standard, paired with ANT401 master)
Power Supply (suffix -2) 220–240 V AC, 50/60 Hz
Power Consumption 230 VA / 120 W (at 220–240 V AC)
Redundancy Architecture Dual-redundant power supply + dual-redundant ESB bus
Dimensions 482.6 (W) × 132.5 (H) × 310 (D) mm
Weight Approx. 10 kg (including 8 I/O modules)
Mounting 19-inch rack mount (4 × M5 screws)
Operating Temperature 0 to 50°C (basic type)
Contact Us WhatsApp / Wechat:+86 18150087953
Phone:+86 18150087953
Email:sales@cxplcmro.com