Description

Application Scenarios:

A semiconductor testing lab in California struggled with unstable data transmission between its test bench(12 GPIB instruments:multimeters,oscilloscopes,power supplies)and control PC.Legacy GPIB cards suffered from electromagnetic interference(EMI)from nearby wafer fabrication equipment,causing 15%data loss and test retakes.Upgrading to NI GPIB-140A modules solved the issue:their fiber-optic transmission blocked EMI,and HS488 mode boosted transfer speed to 2.8 Mbps.Data loss dropped to 0.1%,and test throughput increased by 30%.During a 72-hour continuous test run for a new microchip,the GPIB-140A maintained stable communication with all 14 connected instruments—the lab manager noted,”The GPIB-140A eliminated our biggest bottleneck;we now validate 50%more chips per week without retests.”

Parameter:

Main Parameters

Value/Description

Product Model

NI GPIB-140A

Manufacturer

National Instruments(NI)

Product Category

GPIB Interface Card/Extender(IEEE 488 Compliant)

Core Function

PC-instrument communication,data acquisition,remote instrument control

GPIB Standards

IEEE 488.1,IEEE 488.2,HS488

Data Transmission Rate

1.1 Mbps(IEEE 488.1),1.5 MB/s(standard mode),2.8 Mbps(HS488 mode)

Max Connected Devices

Up to 14 GPIB-compatible instruments

Transmission Distance

20m(copper),up to 2km(fiber-optic version)

Interface Type

GPIB(DB-25 connector),optional fiber-optic port

Power Requirements

+5V DC(500mA)or 24V DC;10-25W power consumption

Operating Environment

0°C to 55°C(operating),-20°C to 70/85°C(storage);10-90%RH(non-condensing)

Physical Specifications

140×80×40mm to 212×160×44mm(varies by version);~0.18-0.5kg

Protection Rating

NEMA/IEC IP30

Software Compatibility

NI-VISA,NI-488.2 drivers;LabVIEW,C/C++;Windows,Linux,macOS

Diagnostic Features

LED indicators(power,GPIB transmission status,device address)

Technical Principles and Innovative Values:

Innovation Point 1:HS488+DMA for Ultra-Fast Data Throughput.Unlike standard GPIB cards limited to 1 Mbps,the GPIB-140A supports HS488 mode(2.8 Mbps)and direct memory access(DMA).This bypasses CPU bottlenecks:a telecommunications lab testing 5G transceivers reduced data transfer latency from 200ms to 30ms,enabling real-time signal analysis.In ATE systems,this cuts test cycle time by 40%vs.legacy cards.

Innovation Point 2:Fiber-Optic Transmission for EMI Immunity.Industrial environments(e.g.,factories,power plants)suffer from EMI that corrupts copper-based GPIB signals.The GPIB-140A’s fiber-optic version uses light-based transmission to block EMI and ground-loop interference.A power electronics lab reduced measurement errors from 5%to 0.2%by replacing copper GPIB links with fiber-equipped GPIB-140A modules.

Innovation Point 3:Plug-and-Play+Multi-OS Compatibility.The module integrates seamlessly with NI’s software ecosystem(LabVIEW,NI-488.2)and supports Windows,Linux,and macOS.A university research team building a custom bioreactor monitoring system configured 8 instruments(pH meters,thermocouples)via the GPIB-140A in 30 minutes—no low-level programming required.

Application Cases and Industry Value:

Case 1:Biomedical Research Data Acquisition

A university’s neuroscience lab needed to synchronize data from 10 GPIB-enabled instruments(EEG machines,microelectrode amplifiers,temperature controllers)for brain activity studies.Legacy GPIB cards couldn’t handle simultaneous data streams,causing time-stamp mismatches.Deploying GPIB-140A modules with LabVIEW integration solved this:the cards’DMA transfer ensured 1ms synchronization across all instruments,and fiber-optic links eliminated noise from nearby MRI machines.The lab published 3 breakthrough papers using the reliable data—the lead researcher said,”The GPIB-140A turned our fragmented setup into a unified system;we trust every data point now.”

Case 2:Electronics Manufacturing ATE

A Chinese electronics firm’s smartphone PCB test line used 12 GPIB instruments(boundary scan testers,LCR meters)but faced 2-hour downtime daily due to GPIB connection failures.Upgrading to GPIB-140A modules with LED diagnostics changed this:technicians identified faulty instrument connections via red”Device Fault”LEDs in 5 minutes(vs.30 minutes prior).The cards’20m copper transmission also let the control PC move to a temperature-controlled room,reducing component overheating.Annual downtime dropped by 700 hours,saving$280,000 in lost production.

Installation,Maintenance,and Full-Cycle Support:

Installation of the GPIB-140A follows three key steps:1)Insert the card into a PC’s expansion slot(or connect via external enclosure)and secure it.2)Connect instruments using GPIB cables(or fiber-optic cables for EMI-sensitive environments)–ensure DB-25 connectors are fully seated.3)Install NI-488.2 and NI-VISA drivers,then launch LabVIEW or your preferred software to detect the module(LED”Power”and”Link”lights confirm connection).For industrial setups,mount the module in a NEMA-rated cabinet to protect against dust(compliant with IP30 rating).

Routine maintenance minimizes downtime:Weekly,inspect LED indicators–a flashing”Transmit”light confirms active data flow,while a steady red”Fault”light signals issues(e.g.,loose cable,instrument address conflict).Monthly,update drivers via NI Update Service to ensure HS488 and DMA compatibility.Quarterly,clean card vents with compressed air(avoid direct blasts on components)and test fiber-optic links for signal loss using an optical power meter.For troubleshooting,use NI MAX(Measurement&Automation Explorer)to run self-tests on the GPIB-140A and validate instrument communication.

We back the GPIB-140A with NI’s industry-leading 2-year warranty,covering manufacturing defects and driver compatibility issues.Our 24/7 technical support team includes GPIB-certified engineers who assist with fiber-optic integration,HS488 tuning,and LabVIEW programming.We stock modules globally for next-day delivery–critical for ATE systems where downtime costs$10,000+per hour.For large deployments(e.g.,semiconductor fabs),we provide on-site training on module calibration and EMI mitigation,ensuring your test systems meet precision requirements for years.

The NI GPIB-140A isn’t just an interface card—it’s the backbone of reliable test and measurement systems.Whether you’re automating PCB testing,synchronizing biomedical instruments,or building ATE for 5G devices,it delivers the speed,compatibility,and durability needed to eliminate data gaps and boost efficiency.Contact us to design a custom GPIB system with the GPIB-140A,or request a demo of its fiber-optic anti-interference capabilities in your environment.

选择深圳长欣，选择放心，售后无忧大量现货，当天顺丰发货！！！