ABB P-HB-RMU-8000N200 High-Efficiency Industrial PSU

Description

The ABB P-HB-RMU-8000N200 is a high-power, high-efficiency 24V DC industrial power supply module designed for mission-critical automation and control systems. With an impressive 8000W output rating, it serves as the backbone for powering extensive DCS (Distributed Control System) I/O networks, PLC racks, and high-current field devices where reliability and power density are paramount.

Application Scenarios

In a large chemical processing plant, the DCS system controlling critical reactors and safety shutdown systems cannot afford a single point of failure. The ABB P-HB-RMU-8000N200 is deployed here in a redundant (N+1) configuration within a centralized power cabinet. It takes the unstable plant AC mains (200-240V), converts it to a clean and regulated 24V DC bus, and distributes it to hundreds of remote I/O stations and controller chassis via redundant power distribution blocks. Its high efficiency (≥95%) minimizes heat generation in the crowded cabinet, while its wide operating temperature range ensures continuous operation even in non-climate-controlled electrical rooms adjacent to the production floor.

Category: FUJI

Contact Us WhatsApp / Wechat：+8618150087953
Phone：+86 18150087953
Email：sales@cxplcmro.com

Description

Parameter

Main Parameters	Value/Description
Product Model	P-HB-RMU-8000N200
Manufacturer	ABB
Product Category	High-Power Switched-Mode Power Supply (SMPS)
Input Voltage	200 – 240 VAC (Single Phase)
Output Voltage	24 VDC (Precision Regulated)
Rated Power	8000 W (8 kW)
Output Current	Up to 333 A (Continuous)
Efficiency	≥ 95% (Typical)
Cooling Method	Forced Air (Internal Fan)
Operating Temperature	-20°C to +60°C
Protection Class	IP20 (Chassis Mount)
Certifications	CE, UL, cULus (Industrial Standards)
Communication	Optional Monitoring (Status Signals)

Technical Principles and Innovative Values

The ABB P-HB-RMU-8000N200 is engineered to deliver extreme power density and resilience for industrial control systems.

Innovation Point 1: Extreme Power Density for Modern DCS. Packing 8000W into a standard 19-inch rack-mount or chassis-mount form factor, this module eliminates the need for multiple smaller power supplies wired in parallel. This reduces wiring complexity, saves valuable panel space, and centralizes power management for large-scale systems like ABB’s Bailey or System 800xA DCS.
Innovation Point 2: High Efficiency for Thermal Management. With an efficiency rating of 95% or higher, the P-HB-RMU-8000N200 converts AC to DC with minimal energy loss as heat. This is critical in sealed industrial cabinets where excessive heat can degrade the lifespan of nearby sensitive electronics. Lower heat output reduces the burden on cabinet cooling systems, leading to lower total cost of ownership.
Innovation Point 3: Redundant and Hot-Swap Capable. Designed for high availability, this power module supports N+1 redundant configurations. It can be equipped with OR-ing diodes or used with external redundancy modules (e.g., P-HB-RMD-xxx) to allow for hot-swap replacement. This means a failed unit can be pulled and replaced without shutting down the control system, ensuring 24/7 process availability.