横川AFG10S野战控制单元

The Yokogawa AFG10S is a standard Field Control Unit (FCU) within Yokogawa’s CENTUM CS 3000 and CENTUM VP distributed control systems. As the computational core of a Field Control Station (FCS), the AFG10S executes real-time process control algorithms, performs logical interlock evaluations, and manages remote I/O nodes via the RIO bus. Powered by a VR5432 RISC processor running at 133 MHz with 32 MB of main memory, the Yokogawa AFG10S occupies the mid-range position in the CENTUM controller hierarchy, delivering deterministic control outputs for continuous process applications where reliability takes precedence over raw computational throughput.

Functionally, the AFG10S sits between the operator station and the field instruments, serving as the physical execution layer for control strategies. It communicates with upper-level HMI stations through dual-redundant Vnet/IP interfaces while connecting to up to eight node units via the RIO bus, each of which can further extend to I/O modules for acquiring signals such as temperature, pressure, and flow. A battery-backed memory system preserves program and data integrity for up to 72 hours during power interruptions, eliminating the need for program re-download after short outages. Within Yokogawa’s product line, the AFG10S represents the classic CS 3000-era controller that remains a critical spare part for the substantial installed base of legacy DCS systems worldwide.

Category:
Contact Us WhatsApp / Wechat:+8618150087953
Phone:+86 18150087953
Email:sales@cxplcmro.com

Description

横川AFG10S野战控制单元

 

Technical Specifications

Parameter Name Parameter Value
Product Model AFG10S
Manufacturer Yokogawa Electric Corporation
Product Type Standard Field Control Unit (FCU)
Platform CENTUM CS 3000 / CENTUM VP
Processor VR5432 RISC, 133 MHz
Main Memory 32 MB
Memory Backup Battery backup, max. 72 hours
Communication Interface Dual-redundant Vnet/IP; RIO bus (dual or single)
Max. Connectable Nodes 8 node units
Power Supply Options 100–120 V AC / 220–240 V AC / 24 V DC
Power Consumption (AC) 250 VA
Mounting 19-inch rack mounting (8× M5 screws)
Weight Approx. 19 kg

 

Main Features and Advantages

Deterministic control architecture: The AFG10S employs a VR5432 RISC processor clocked at 133 MHz, a specification that may appear modest by consumer electronics standards but reflects the DCS controller’s fundamental priority: cycle determinism rather than peak throughput. The Yokogawa AFG10S firmware and hardware are co-engineered to guarantee stable, predictable scan cycles, avoiding the scheduling jitter that can occur on general-purpose computing platforms. This characteristic is essential for timing-sensitive loops such as reactor temperature control and distillation column pressure regulation, where output timing directly affects product quality and process safety.

Redundant communication assurance: The AFG10S is equipped with dual-redundant Vnet/IP interfaces as standard. When the primary communication link fails, the backup link assumes data transfer without interrupting control execution. This design ensures that data refresh between the operator station and the controller remains uninterrupted despite a single network fault, directly reducing the risk of operational blind spots caused by network single points of failure. The RIO bus also supports redundant configuration, extending reliability to the I/O communication layer and ensuring that field signal acquisition continues even under adverse conditions.

Maintenance-oriented design: The 72-hour battery backup capability of the AFG10S means that planned short-duration power interruptions or supply transfers do not result in loss of control programs, reducing the workload associated with re-downloading and verification upon restart. Physically, the AFG10S shares identical interface dimensions and terminal assignments with its redundant counterpart, the AFG10D, allowing maintenance personnel to perform replacements without altering field wiring. The only additional consideration when substituting or upgrading to the D version is confirming that the cabinet slot space accommodates the extra module.

Contact Us WhatsApp / Wechat:+86 18150087953
Phone:+86 18150087953
Email:sales@cxplcmro.com