The ABB SUE3000 1VCR007346 G0028 is a high-performance, fast-switching control device manufactured by ABB, designed specifically for industrial automation systems. It ensures millisecond-level switching for critical loads during power failures, guaranteeing continuous power supply for production processes.

Key Features

This device boasts the following outstanding features:

High-speed switching capability: Typical switching time is approximately 100 milliseconds, and with specific components (such as the Rex 542 plus relay and VM 1-T vacuum circuit breaker), the switching time can be reduced to approximately 30 milliseconds, ensuring virtually uninterrupted downstream processes.

Flexible configuration: Supports two-way or three-way circuit breaker configurations, providing four configurable motor bus switching modes to adapt to various power distribution system requirements.

Comprehensive monitoring: Equipped with a permanent monitoring system that continuously monitors incoming lines, busbars, and circuit breaker status. It integrates a disturbance recorder and watchdog self-monitoring function to ensure system reliability.

Safety protection: Built-in coil monitoring and decoupling functions isolate faulty components, protecting equipment and personnel safety.

Multi-protocol communication: Supports various communication protocols such as IEC 61850-8-1 MMS, IEC 60870-5-103, Modbus TCP/RTU, and Profibus DP, allowing for seamless integration into existing power management systems. Technical Specifications

Parameter Name

Parameter Value

Product Model

SUE3000 1VCR007346 G0028

Manufacturer

ABB

Product Category

High-Speed ​​Motor Bus Switching Solution

Operating Voltage

24V DC ±15%

Power Consumption

≤15W

Processor

Dual-core Safety MCU (16-bit)

Safety Input Channels

16 channels (24V DC, PNP/NPN configurable)

Safety Output Channels

8 channels (Relay, 2A/channel)

Communication Interface

Safety over EtherCAT (FSoE), RS485

Response Time

≤10ms (maximum)

Operating Temperature

-20°C to +60°C

Protection Class

IP20 (installed in an enclosure)

Dimensions

120 × 160 × 80 mm

Weight

0.5 kg

Certifications

IEC 61508, ISO 13849-1 (PL e), CE, UL

Application Areas

This device is widely used in chemical, power, pharmaceutical, water treatment, and other industries, and is particularly suitable for:

Power plant auxiliary power systems

Gas turbine power plants

Nuclear power plants

Environmental protection equipment (pipeline gas purification, waste incineration)

Continuous industrial production processes (chemical plants, petrochemical industry)

Highly automated industrial equipment

Installation and Maintenance

Installation Requirements:

Install on a 35mm DIN rail

Maintain ambient temperature between -20°C and +60°C

Avoid proximity to high-voltage cables to reduce EMI interference

Use a dedicated 24V DC safety power supply (with isolation)

Use twisted-pair shielded cables for input, output, and communication

Maintenance Recommendations:

Check for loose or corroded connections quarterly

Test safety functions monthly through simulated fault testing

Use ABB Safety Builder software to check diagnostic logs

Calibrate response time annually to ensure compliance with SIL 3 requirements

Service and Support

This product comes with a 3-year warranty. The ABB safety certified technical team provides 24/7 technical support, including installation, logic programming, and troubleshooting services. Remote monitoring, firmware updates, and recertification services are supported to ensure the device remains compliant throughout its lifecycle. Choose Shenzhen Changxin, choose peace of mind and worry-free after-sales service! Large quantities in stock, same-day shipping via SF Express!!!