Description

The ABB PHARPS32200000 F8-G2B9B3B6 is a fully redundant,hot-swappable power supply module engineered for ABB’s AC 800M distributed control system(DCS).Designed to deliver stable,filtered,and protected DC power to critical controller racks,it ensures uninterrupted operation in mission-critical applications such as power generation,oil&gas,and chemical processing—where even a millisecond of power loss can trigger cascading shutdowns.

Application Scenarios

At a nuclear power plant in Eastern Europe,a non-redundant power supply failure during a grid transient caused an unplanned turbine trip,costing over$2 million in lost generation.After upgrading to the ABB PHARPS32200000 F8-G2B9B3B6,the facility achieved true N+1 redundancy:when one supply failed during a lightning-induced surge,the second instantly assumed full load with zero voltage dip.The system logged the event,alerted maintenance,and kept all safety I/O active—preventing regulatory reporting incidents.This real-world resilience underscores how the ABB PHARPS32200000 F8-G2B9B3B6 transforms power from a vulnerability into a certified layer of process integrity.

Parameter

Main Parameters Value/Description

Product Model PHARPS32200000 F8-G2B9B3B6

Manufacturer ABB

Product Category Redundant Power Supply Module(for AC 800M DCS)

Output Voltage 24 VDC±1%(regulated,low ripple)

Maximum Output Current 20 A continuous per module(40 A in redundant pair)

Input Voltage Range 85–264 VAC,47–63 Hz(universal input)

Redundancy Mode Active/standby with automatic load sharing and failover(<1 ms)

Efficiency≥90%at full load(reduces heat and energy cost)

Protection Features Overvoltage,overcurrent,short-circuit,thermal shutdown

Diagnostic Interface Integrated status LEDs+digital health signal to AC 800M CPU

Installation Slide-in module for PHARPBP32 backplane;supports hot-swap

Operating Temperature 0°C to+60°C(derating above 50°C)

Certifications CE,UL 61010-1,IEC 61000-6-2/4,SIL 2 ready(per IEC 61508)

Technical Principles and Innovative Values

Innovation Point 1:True Hot-Swap with Zero-Break Power Transfer–The ABB PHARPS32200000 F8-G2B9B3B6 uses synchronized switching and shared DC bus architecture to enable live replacement without interrupting field I/O or controller logic—critical for 24/7 processes like refineries or water treatment.

Innovation Point 2:Intelligent Diagnostics&Predictive Alerts–Beyond basic OK/FAULT LEDs,the module reports real-time metrics(input voltage,output current,internal temperature)to the AC 800M CPU via backplane signaling,enabling predictive maintenance before failures occur.

Innovation Point 3:Optimized for AC 800M Backplane Compatibility–The“F8-G2B9B3B6”suffix denotes specific firmware and mechanical coding that ensures plug-and-play interoperability with PHARPBP32 baseplates and PM86x controllers—eliminating configuration mismatches.

Innovation Point 4:High-Density 20A Output in Standard Form Factor–Unlike older 10A supplies requiring two slots per rail,this module delivers 20A in a single slot,freeing space for additional I/O while supporting high-density modules like AI880 or DO820.

Application Cases and Industry Value

In a Gulf Coast LNG export terminal,the ABB PHARPS32200000 F8-G2B9B3B6 powers redundant AC 800M racks controlling cryogenic loading arms.During a Category 3 hurricane,grid power fluctuated wildly,but the dual-supply setup maintained clean 24VDC to all safety shutdown valves—ensuring no uncontrolled release of LNG.Post-storm analysis showed zero power-related anomalies.In another case,a pharmaceutical manufacturer used this module in a sterile filling line;its ultra-low ripple(<50 mVpp)prevented noise-induced errors in sensitive analog sensors,ensuring FDA-compliant batch records.

Related Product Combination Solutions

ABB PHARPBP32:Dedicated backplane for redundant power and I/O modules;required for PHARPS32200000 F8-G2B9B3B6.

ABB PM864A/PM865A:AC 800M redundant CPU pairs powered by this supply.

ABB AI880:High-density analog input module benefiting from stable 24VDC.

ABB DO820:Digital output module requiring clean power for relay actuation.

ABB TB850:Terminal base for local I/O connected to powered racks.

ABB System 800xA:Enterprise platform that visualizes power supply health via Asset Optimization.

ABB PHARPS32100000:10A version for lighter loads(non-redundant or small racks).

ABB Automation Builder:Used to configure power diagnostics and alarm thresholds.

Installation,Maintenance,and Full-Cycle Support

The ABB PHARPS32200000 F8-G2B9B3B6 installs into the leftmost slots of a PHARPBP32 backplane with tool-less retention clips.Wiring uses standard IEC terminal blocks for AC input and shielded DC output cables.Commissioning includes verifying redundancy via forced failover test—swapping modules under full load without system interruption.Routine maintenance involves checking ventilation clearance and reviewing diagnostic logs in System 800xA for early signs of capacitor aging or fan wear.

We provide end-to-end lifecycle support—including compatibility validation with your AC 800M firmware,burn-in testing under simulated load,and spare unit provisioning with matching revision codes.Every ABB PHARPS32200000 F8-G2B9B3B6 we supply undergoes rigorous validation:

Full-load efficiency and ripple test

Redundancy failover timing(<1 ms verified)

Thermal imaging under 40°C ambient

Backplane communication handshake

All units are ESD-protected,factory-sealed,and backed by a 12-month warranty.

Contact us for a customized solution—whether you’re building a new SIL-rated control system or hardening an existing AC 800M installation against power threats,the ABB PHARPS32200000 F8-G2B9B3B6 delivers certified reliability,intelligent diagnostics,and seamless redundancy that keeps your process running—no matter what the grid does.

选择深圳长欣，选择放心，售后无忧 大量现货，当天顺丰发货！！！