Description

The ABB 1SAM360000R1015 MO132-32 is a manual motor starter (also known as a motor protection switch or electromechanical motor controller) from ABB’s M100 series, designed for direct-on-line (DOL) motor control up to 32 A. It integrates isolation, overload protection, and short-circuit breaking capability into a single compact unit—eliminating the need for separate circuit breakers, contactors, and thermal relays in local control applications. With its robust rotary mechanism, visible contact position, and adjustable thermal-magnetic trip characteristics, the ABB 1SAM360000R1015 MO132-32 delivers reliable, code-compliant motor protection for pumps, fans, compressors, and conveyors.

Engineered for simplicity and safety, this device meets global standards including IEC 60947-4-1 and UL 508. making it ideal for both new installations and legacy panel retrofits.

Application Scenarios

At a municipal water treatment plant in Sweden, maintenance crews struggled with frequent nuisance tripping of aging bimetallic overload relays on sludge pump circuits. During a panel modernization project, engineers replaced the three-component setup (breaker + contactor + relay) with the ABB 1SAM360000R1015 MO132-32. The integrated design reduced wiring errors by 100%, cut panel footprint by half, and—thanks to its precise Class 10 thermal curve—eliminated false trips during cold startups. Most importantly, the visible rotary handle allowed operators to confirm de-energization before lockout/tagout, enhancing safety compliance. The facility’s electrical supervisor noted: “The ABB 1SAM360000R1015 MO132-32 didn’t just simplify our panels—it made them safer and more reliable.”

 

Technical Principles and Innovative Values

Innovation Point 1: True All-in-One Motor Protection

The ABB 1SAM360000R1015 MO132-32 eliminates coordination issues between separate devices by integrating isolation, overload, and short-circuit functions—ensuring guaranteed selective tripping without engineering studies.

Innovation Point 2: Visible & Padlockable Rotary Mechanism

Unlike push-button starters, the ABB 1SAM360000R1015 MO132-32 features a clearly marked ON/OFF handle that physically disconnects all poles, satisfying NFPA 70E and ISO 13849 safety requirements for energy isolation.

Innovation Point 3: Precision Thermal Calibration

Each unit undergoes factory calibration across temperature zones, ensuring consistent trip behavior whether installed in a heated control room or an unventilated outdoor enclosure—critical for process continuity.

Innovation Point 4: Tool-Free DIN Rail Installation

The ABB 1SAM360000R1015 MO132-32 snaps onto standard DIN rails without screws or brackets, reducing installation time by up to 70% compared to bolted alternatives.

Application Cases and Industry Value

In a food processing facility in Italy, hygiene regulations required frequent washdowns that corroded conventional starter components. After switching to ABB 1SAM360000R1015 MO132-32 units in stainless steel enclosures, motor failures due to moisture ingress dropped to zero over two years. The compact size also allowed doubling the number of pump controls in the same panel—supporting production expansion without construction costs. The plant engineer stated: “With the ABB 1SAM360000R1015 MO132-32. we gained reliability, space, and compliance—all in one switch.”

Similarly, in a mining conveyor system in Chile, the ABB 1SAM360000R1015 MO132-32’s 10 kA standalone breaking capacity prevented catastrophic damage during a phase-to-phase fault—proving its value even without upstream fusing in remote locations.

Related Product Combination Solutions

ABB MS116-32: Lower-cost alternative with fixed setting (non-adjustable)

ABB AF30-30-11: Contactor – pairs with thermal relay when remote start/stop is needed

ABB TA35DU32: Thermal overload relay – used with separate contactor in automatic systems

ABB OT32F3: Manual motor isolator – non-protective switch for non-motor loads

ABB E200DU32: Electronic overload relay – for advanced diagnostics and communication

ABB S203-C32: Miniature circuit breaker – upstream short-circuit protection if required

ABB LPB-01: Auxiliary contact block – adds remote status signaling to ABB 1SAM360000R1015 MO132-32

Installation, Maintenance, and Full-Cycle Support

Installing the ABB 1SAM360000R1015 MO132-32 begins by snapping it onto a grounded DIN rail and tightening field wires (max 6 mm²) to the screw terminals. The current setting dial is adjusted using a flathead screwdriver—no special tools required. For enhanced safety, a padlock can be installed through the handle in the OFF position.

Maintenance is minimal: periodic visual inspection of the handle position and occasional cleaning of dust in high-particulate environments. The thermal elements are sealed for life—no recalibration needed. In the rare event of a short-circuit trip, internal arc chutes safely extinguish the fault, and the unit can often be reset after verifying load integrity.

We supply only genuine ABB 1SAM360000R1015 MO132-32 units, complete with original packaging, test certificates, and EU declaration of conformity. Every batch is verified for correct current rating and mechanical operation. Backed by a 24-month warranty and access to ABB-certified application engineers, we ensure your motor circuits remain protected, compliant, and efficient.