SHINKAWA MP-2S Product Introduction

product overview

SHINKAWA MP-2S is a high-performance redundant servo control system launched by SHINKAWA, designed specifically for the fields of industrial automation and precision manufacturing. The system is centered around high reliability, precise control, and fast response, and is widely used in scenarios such as robotic arms, automated assembly lines, and robot control. It supports multi axis synchronous operation and complex motion coordination.

Main features and advantages:

Redundant design ensures stability: Adopting a dual controller architecture with primary and backup, the system automatically switches to backup in case of a single controller failure, ensuring continuous operation and avoiding unexpected shutdowns.

High precision motion control: supports triple control modes of position, speed, and torque, with an accuracy of up to micrometers, meeting the requirements of precision machining, assembly, and other scenarios.

Real time monitoring and fault self diagnosis: Built in sensors monitor the motor status in real time, trigger alarms and activate protection mechanisms in case of abnormalities, and provide fault location function to shorten maintenance time.

Rapid response capability: Signal processing response time ≤ 1ms, suitable for high-frequency and high-speed industrial scenarios, such as rapid positioning and switching actions of robotic arms.

Multi protocol compatibility: Supports industrial communication protocols such as EtherCAT, PROFINET, Modbus, etc., and can be seamlessly integrated into SCADA systems or PLC control networks.

Energy saving and low noise: Adopting field oriented control (FOC) technology to optimize energy management, reduce energy consumption and motor heating, while minimizing mechanical vibration and noise.

Technical specifications:

parameter description

Model MP-2S

Control type: Three phase permanent magnet synchronous motor (BLDC)

Response time ≤ 1ms

Communication protocols EtherCAT, PROFINET, Modbus

Control accuracy Position accuracy: ± 0.01mm; Speed accuracy: ± 0.1%

Environmental adaptability industrial grade protection (IP65 optional), temperature resistance -20 ℃ to 60 ℃

Power range 0.1-10kW (expandable)

Input voltage 24V/48V DC

Fault protection function for overcurrent, overheating, and short circuit protection

Application areas:

Precision manufacturing: high-precision positioning and calibration of semiconductor wafer processing and electronic component assembly lines.

Robotics technology: Joint control of industrial robots, multi axis collaborative operation of robotic arms.

Automation equipment: synchronous control of conveyor belts, dynamic adjustment of high-speed sorting systems.

Energy and Chemical Industry: Precise regulation of pipeline valves and closed-loop control of temperature sensitive processes.

Rail transit: precise motion feedback of train braking system and steering mechanism.

Related products:

SHINKAWA MP-2T: Same series servo system, supports higher power output, suitable for heavy machinery control.

SHINKAWA MP-2P4: Multi axis synchronous control expansion module, paired with MP-2S to achieve complex mechanical linkage.

SHINKAWA MP-2W2: Wireless communication adapter, enhancing the flexibility of MP-2S in remote monitoring scenarios.

 

SHINKAWA MP-2S产品简介

产品概述

SHINKAWA MP-2S是新川电机（SHINKAWA）推出的高性能冗余伺服控制系统，专为工业自动化及精密制造领域设计。该系统以高可靠性、精准控制和快速响应为核心，广泛应用于机械臂、自动化装配线、机器人控制等场景，支持多轴同步操作与复杂运动协同。

主要特点和优势：

冗余设计保障稳定性：采用主/备份双控制器架构，单控制器故障时自动切换至备份，确保系统连续运行，避免意外停机。

高精度运动控制：支持位置、速度、力矩三重控制模式，精度可达微米级，满足精密加工、装配等场景需求。

实时监控与故障自诊断：内置传感器实时监测电机状态，异常时触发报警并启动保护机制，同时提供故障定位功能，缩短维护时间。

快速响应能力：信号处理响应时间≤1ms，适应高频、高速工业场景，如机械臂快速定位与切换动作。

多协议兼容性：支持EtherCAT、PROFINET、Modbus等工业通信协议，可无缝集成至SCADA系统或PLC控制网络。

节能与低噪音：采用磁场定向控制（FOC）技术优化能量管理，降低能耗并减少电机发热，同时减少机械振动与噪音。

技术规格：

参数描述

型号MP-2S

控制类型三相永磁同步电机（BLDC）

响应时间≤1ms

通信协议EtherCAT、PROFINET、Modbus

控制精度位置精度：±0.01mm；速度精度：±0.1%

环境适应性工业级防护（IP65可选），耐温-20℃至60℃

功率范围0.1-10kW（可扩展）

输入电压24V/48V DC

故障保护功能过流、过热、短路保护

应用领域：

精密制造：半导体晶圆加工、电子元件装配线的高精度定位与校准。

机器人技术：工业机器人关节控制、机械臂多轴协同操作。

自动化设备：输送带同步控制、高速分拣系统的动态调节。

能源与化工：管道阀门精密调节、温度敏感工艺的闭环控制。

轨道交通：列车制动系统、转向机构的精准运动反馈。

相关产品：

SHINKAWA MP-2T：同系列伺服系统，支持更高功率输出，适用于重型机械控制。

SHINKAWA MP-2P4：多轴同步控制扩展模块，与MP-2S搭配实现复杂机械联动。

SHINKAWA MP-2W2：无线通信适配器，增强MP-2S在远程监控场景的灵活性。

Choose Shenzhen Changxin for worry-free after-sales service and high-quality products. We only cooperate with first-tier brand manufacturers in the industry. Our products are imported and comprehensive. We provide thoughtful pre-sales service, communicating multiple times with customers about product models, quality, prices, and delivery schedules to jointly confirm the solutions and address users’ concerns in advance. Business execution is in place, ensuring on-time delivery of ordered products and formulating a comprehensive delivery plan to guarantee the project schedule. We also assist users in handling acceptance procedures.

Our after-sales service is impeccable. For any problems during the warranty period, we only replace, not repair. We never shirk responsibilities or pass the buck when encountering problems. Our service hotline is available 24/7: 18150087953

SOLEMN COMMITMENT

1. For all items, modules, and cards sold by our company, if any quality problems occur during normal use within the warranty period, we will provide free replacements without any excuse or delay.
2. For non-discontinued materials and equipment that are out of the warranty period, we only charge the cost of relevant accessories for quality problems.
3. For discontinued materials and equipment, we provide alternative models and equipment replacement process services.
4. For the materials and equipment purchased by customers, we offer lifetime free system software upgrades and provide relevant technical documents for free.
5. We regularly follow up on the usage of the materials purchased by customers and promptly solve any problems.
6. Our company’s hotline provides 24-hour service, and we will respond to customers’ questions within 1 hour.
7. For any other matters not covered, our company adheres to the attitude of “thoughtful service and full responsibility” and solves problems from the customer’s perspective in a practical way. With a serious and rigorous corporate style, we wholeheartedly serve every customer.

The company mainly imports PLC modules, programmable controllers, servo control systems and DCS spare parts, such as: ABB, AB (Rockwell), GE (General Electric), Bentley, Honeywell, Emerson, Motorola, Invensys, Westinghouse, etc. The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers, and can directly purchase from abroad, providing equipment and spare parts from different countries and manufacturers.

We supply directly from abroad, without middlemen, reducing the cost of use.

There is really no middleman who can make a price difference! !

If you have any defects or need to import PLC, DCS spare parts, please contact our team, we will help you find reliable and high-quality products super quickly, while shortening the delivery time to ensure that your equipment can operate normally in the right environment. On time.

Professionally provide: PLC programmable control system, distributed control system (DCS), safety instrument system (SIS), ESD system, vibration monitoring system, turbine compressor control system (CCS) and other PLC modules, various industrial control systems, system modules, CPU, IO module, DO module, AI module, DI module, network communication module, Ethernet module, motion controller, analog input module, analog output module, switch input module, switch output module, module redundancy, power supply module, relay output unit, relay input unit, processing unit.

Products are widely used in: electricity, petroleum, mine hoisting, ports, heating, gas, water supply, sewage treatment, metallurgy, papermaking, textile, chemical industry, water conservancy and other modern industrial fields!

ABB 5SHY3545L0010/3BHB013088R0001

MOTOROLA MVME2434

MOTOROLA MVME2432

A-B 81001-450-53-R

ABB PNI800

WOODWARD 9907-164

NI PXIE-4145

ABB CI871K01 3BSE056797R1

MOTOROLA MVME5500-0161

MOTOROLA MVME5500-0163

EMERSON MVME55006E-0163

GE DS200DCFBG1BJB

ABB PPD113B01-10-150000

ABB PM904F 3BDH001002R0001

MOTOROLA MVME2400

FOXBORO H92A0K9V0H00

PIONEER MAGNETICS PM36218B-10P-1-8PH-J

GE IC698CPE040-JP

EMERSON MVME7100

ABB HPC800K02

ABB SYN5202-0277

ABB HPC800K02（含HC800模块、CP800模块、底座）

MOTOROLA MVME5500

MOTOROLA MVME55006E-0163R

GE IS215UCVEM09B

AMAT 0090-76110 VME PCB

ABB 5SHX2645L0002/3HB012961R0001

ABB AO2000-LS25

ABB PM865K01 3BSE031151R1

ABB 5SHX1445H0001 3BHL000391P0101 3BHB003230R0101 5SXE05-0152

KONGSBERG DPS112

GE VMIVME-7750

ABB AO2000-LS25

TRICON 4352B

ABB PFSK152

TRICONEX 3009

MOOG D136-001-007

SCANde INTELLISCANDE14-405NM SCANLAB